Rhinestone Cup Chain Bracelet (crisscross method)

This beautiful Rhinestone Cup Chain bracelet is very popular at our bead shows. you can use just about any cord as the base, as long as the hole(s) in button you use are big enough to thread the cord through.

To get the right amount/length of supplies, take a length of string and wrap around wrist. Make it loose enough so that it is comfortable to wear. If you want the bracelet to wrap a few times, wrap the string that many times and remember to loosen for comfort. Mark the string with marker and measure the length.

supplies

Here’s what you’ll need:
Rhinestone Cup Chain– you will need 2 lengths of the measured amount (we used fuchsia, gold plate and topaz, gold plated)
Core Cord (we suggest leather or suede) -double the measured length + 5inches
Anchoring string (this is was will hold the chain in place) – atleast 3 times the measured length
1 Button (can be 2-holed or shank)

You will also need super glue and scissors.

01

Take you core cord and fold in half, creating a loop.

02

Take your anchoring thread. Also fold in half and put around the core cord loop.

Untitled-1-01

Now tie a tight knot around the core cord.

03

The loop made by the core cord should be big enough to slip you button through with little resistance.

04

When the loop in the right size dab a little drop of glue on the back. This will enforcer the knot.

06

Take the 2 lengths of cup chain and also glue then onto the core cord. This will keep everything in place whule you work.

Untitled-1-03

take the two end of ancorring thread and crisscross them behind the cup chain and core cord.

Untitled-1-04

Then bring the to the top and crisscross between the first and second set of rhinestones.

07

Hold the work between your index and thumb fingers to keep your work in place.

 

Untitled-1-05

After you make your first crisscross in the front, take the to thread end and crisscross in the back again.

08

Continue working the length of the bracelet.

09

Take care to make the back crisscrosses even. Check your work frequently.

10

When you have reached the end, Make you last crisscross and tie a knot in the back. Enforce it with a dab of glue.

11

When the glue is dry trim off the tails of the anchoring thread.

13

Take the core cord and tie them in a knot, close to the last set of rhinestones.

12

Cut the end of your suede or the leather to a point. This will make threading you button easier.

14

If you have a 2 hole button – thread from the back to the front, then into the second hole- from front to back.

15

You will have one cord threaded through the button and the other running along the back.

16

Tie the two tails together to create a knot. This finished the bracelet.

17

Your bracelet is now ready to wear! Enjoy.


11 responses to “Rhinestone Cup Chain Bracelet (crisscross method)

  1. This bracelet rocks!

  2. Pingback: How to Use Rhinestone Cup Chain for Jewelry | Eureka Crystal Beads Blog

  3. very cool idea thanks!

  4. Bonnie Rohrbach

    Walter: You always keep your promises….the tutorials are the BEST!!!! Thank Bonita & especially your daughter (I forget her name, but certainly not her!).

  5. I wish it was a video, having trouble starting it.

    • We are always adding to our YouTube Video Channel so although we don’t have a project similar this this one up yet, keep checking back for similar projects and simple tips and tricks. Good luck!

  6. Which size of cup chain do you use, and what is the “string”? Thanks, great bracelet tutorial!

    • Hi Gaisy,
      Thank you for your comment.
      We used 3mm cup chain and 3mm suede.
      For the thread, you can use any beading thin cord or thread like C-lon, S-lon or any thread (like embroidery thread) you have on hand.
      We will be adding a thread section soon to our website.

  7. Thank you for the info!
    Gaisy

  8. Awesome technique

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s